Pinwheel Coaster
A simple coaster that starts from a square twist and has a color change.
The term geometric origami is not well-defined. Here, I use it to mean all non-figurative designs.
A simple coaster that starts from a square twist and has a color change.
A pattern of hexagons, rectangles, and triangles, folded from a hex grid. In order to make the model more interesting, I skipped some molecules, which result...
Triangles, 16×16 grid, folded from red Khepera paper.
A recursive variant of Star a la Fujimoto III. Of course, even more levels can be folded, but only the outer layer will have a color change.
This simple corrugated pattern, folded from a hexagon, reminds me of the waves made by a water droplet falling onto the surface of water.
This model has a very nice folding sequence. It stays flat throughout almost all the steps, and is only popped into being 3D at the last moment. Proportions ...
A very simple box whose lid is divided into four identical squares. It is basically the back side of a single molecule of Four-Sink Base Tessellation plus wa...
Lucky Star Fractal, level 3, folded from dark green Tant paper. This model is so nice I’ve folded it probably dozens of times (which rarely happens) and each...
This is one of many polyhedra from a single sheet designed by Shuzo Fujimoto. It is folded from a long strip, somewhat shorter than shown in the CP in the bo...
I folded this tessellation for a collaboration with the late Meenakshi Mukerji. I would fold some simple tessellation bases on which her designs were based a...
A simple tessellation on a square grid. Stars appear in the negative space as “holes” in the upper layer of paper while the pattern of the upper layer consis...
This star by Shuzo Fujimoto demonstrates a general technique which I labeled CFW 422. Here, it is combined with the simplest of Fujimoto’s basic stars, Windm...
A full tessellation of the pattern found on Box with Woven Triangles IX, folded from Vintage Paper.
This star by Shuzo Fujimoto is only mentioned in textual form: there isn’t even a picture in Fujimoto’s books. It consists of the molecule of Hemp Leaf (CFW ...
The Fortune Teller, also known as the Cootie Catcher or Salt Cellar, is one of traditional European origami designs. In different languages, it is known unde...
This star is like Petals (CFW 85) but with more paper around the tessellation molecule.
Derived from Box with Woven Triangles IX by changing the layer ordering.
A simple star with color change. I derived it from Shuzo Fujimoto’s Star CFW 367 by folding from a hexagon rather than a triangle and opening up the back to ...
I called this tessellation sidewalk because this flagstone pattern is often used on sidewalks where I live. The design is basically Momotani’s Wall, stretche...
This model is dedicated to the memory of Artur Biernacki, a Polish origami designer who died unexpectedly exactly a year ago, on June 8th, 2023. May light et...
A variant of Star Moira, in which the rays are completely hidden, so the star looks like a simple disk. The oblique view shows some more interesting structur...
A Star Moira variant derived from variant B.
This variant of Star Moira is stronger than variant A and looks like the blade of a buzz saw.
The tessellation molecule that decorates this box spent several years in my drawer before I finally made a clean fold, since I designed it shortly after Dune...
I developed Shuzo Fujimoto’s design, Petals (CFW 85) into a fractal. I don’t have direct proof if Fujimoto was aware of this possibility, but I think it’s li...
I developed Shuzo Fujimoto’s design, Petals (CFW 85) into a fractal. I don’t have direct proof if Fujimoto was aware of this possibility, but I think it’s li...
A very simple, yet elegant design, folded from an equilateral triangle.
Many of Shuzo Fujimoto’s stars are built around tessellation molecules, and thus can, with a simple transformation, be tessellated. For some cases I was able...
Another variant of the Hydrangea by Shuzo Fujimoto, this one using a color change around the edges.
This box is decorated with a tessellation molecule that I called “Zulu” since the square with two diagonals resembles the maritime “Z” (Zulu) flag. Several p...
This is a simple box decorated with a molecule of Braided Pinwheel Tessellation variant C. It was one of my experiments with folding window blind fabric and ...
This origami shape, designed by Shuzo Fujimoto, is a truncated octahedron, but with the square faces replaced by inverted pyramids. It is folded from a singl...
A variant of 30-60-90° Star, just like the base variant, folded from triangles left over when cutting hexagons from rectangles.
I designed this simple star specifically in order to fold it from a unique sheet of paper I got from John Gerard paperworks. It is hand-made paper with a wat...
Another clean fold of Sol, this time from Kaiser/Stark paper.
A regular dodecahedron made from Penultimate Unit, designed by Robert Neale. These units are very simple to fold and very versatile.
A cube made from Penultimate Unit, designed by Robert Neale. These units are very simple to fold and very versatile.
It took me about five years after folding the Woven Square Box to fold a tessellation with multiple molecules used on the box. This model differs from Square...
A color-changed star designed by Shuzo Fujimoto.
Another model using my Color-Wrap Rays technique together with Shuzo Fujimoto’s Scissors (CFW 87) molecule.
A Millwall Brick is an improvised weapon folded from a newspaper. Despite being made from paper, it can be quite dangerous as the tightly rolled layers becom...
This interesting model by Shuzo Fujimoto represents a cube with a corner cut off. Depending on the proportions of the paper strip used, the cut surface is cl...
A traditional bracelet decorated with a pattern of squares formed by color change. This model is very simple to fold, and depending on the number of iteratio...
Another box with a tessellation molecule from the Woven Triangles family. The triangles are visible in deep layers of the model, surrounded by a flat frame.
This translucent design by Shuzo Fujimoto would be called an iso-area tessellation in modern parlance since both sides sport the same pattern (except for bei...
In this variant of Woven Triangles, the triangles are hidden in deeper layers of the molecule and surrounded by flat rectangular panels.
This box is a little gem I found in Fujimoto’s book Twist Origami III. I had never seen a picture of this model before, and I had to do a bit of reverse-engi...
I designed and folded this model in mid-2023. Originally, I planned it as a typical figurative illustration of the story of David and Goliath, often found in...
Propellers Tessellation was one of my first successful designs. Interestingly, I came up with it later than with Square Interlace Tessellation even though Pr...
This box represents the logo of Origami Deutschland, the German Origami Society. I designed this model in the evening after the last day of the 2023 German c...
This star by Shuzo Fujimoto is one of his simple hex twist modifications that are also used as building blocks of his more complex designs. I find this one v...
The name of this corrugation comes from the sessile sea organisms it resembles.
You can make your tessellations more interesting by warping them into various shapes using wet folding. This Square Interlace Tessellation with curled corner...
Per my personal tradition of designing a New Year’s model each year, here’s one for 2024. This is my first origami design folded from Dragon Hide paper (copp...
It’s been a while since I last worked on modular stars, but I designed this one, along with a few variants, at the end of 2023. Variant A is rather fragile a...
I folded this cuboctahedron from modified Open Frame Units (Tomoko Fuse) around 2013. Just 12 units are used, and without modification, they would create a r...
This is an example of how the simple cookie-cutter design can be generalized by varying each side’s length and angles independently, and even applying curved...
Another star by Shuzo Fujimoto which is not even depicted in his books, just mentioned in text. It uses rays from Handle (CFW 133), but the tessellation mole...
This is probably the simplest among Shuzo Fujimoto’s stars derived from decorated hex twists. Fujimoto usually listed it as the first decorated variant, righ...
Another simple modification of a hex twist by Shuzo Fujimoto. When used as a tessellation molecule, this design has later been rediscovered by multiple peopl...
This star by Shuzo Fujimoto has flat-capped teeth rather than sharp rays. Back side has a color change. It is possible to fold this design from a hexagon (as...
This simple model looks like a cookie cutter, and if made with some stiff enough material (thick metal foil perhaps), could probably actually be used as one....
This design is derived from Box with Alien Pyramid by rearranging paper layers. While the latter molecule tends to rise up from the plane and become 3D, this...
The decoration on this box consists of just a few modified open-back square twists. It resembles a flat-topped pyramid such as found in Mesoamerican architec...
Yet another way to fold your tea tag, this time producing a design similar to the traditional paper boat. Proportions are different (depending on those of th...
December 13th, 2023, will mark the 130th anniversary of Stanisław Szukalski’s (1893-12-13 – 1987-05-19) birth. A brilliant and controversial artist, Szukalsk...
This variant of Holly changes the appearance of the pleats in the background of the molecule. Rotating the model 45° makes it look more like a decorated cros...
This star uses the same rays as Handle (CFW 133), but the tessellation molecule in the center is that of Thorn (CFW 86).
Yet another approach to making a cube from two identical units. This design is paper-effective, and looks very clean from the top and the sides. Looking at t...
The first time I folded this tessellation, I used non-transparent paper, which made it look great in reflected light, but allowed little in terms of viewing ...
This star is decorated with a molecule of my Unicursal Hexagram Tessellation. The color-change rays are the same as in Star a la Fujimoto.
A modification of my Sol, adding a color-change background to the tessellation molecule. The gold-blue Washi looks in real life even better than in the pictu...
The name of this simple box, folded from a hexagon, comes from its jagged edge. It is closely related to Bowl Box.
A simple box folded from a hexagon. It is closely related to Crown Box.
I folded this simple book stand from the piece of paper left over after cutting a hexagon from a rectangle. This shape of the sheet, while unusual in the nor...
The digit “7” on this box’s lid is a tessellation molecule, derived from the one on Z-Box. Hiding one of the horizontal bars sounded like a simple enough exe...
Third design in my Well series. The layout looks the same as Well I at first glance, but the central square is placed at a deeper level than all the rectangl...
I folded this classic design by Alessandra Lamio during a workshop with her at the 2018 Outdoor Origami Meeting. Now it hangs on my wall, framed. The molecul...
This super-simple star by Shuzo Fujimoto still looks great when folded from nice paper, in this case red Kouzo-Bokashi Four Seasons washi. This is one of Fuj...
This is variant B of my Framed Heart. Just like the original, it consists of a tessellation molecule placed inside a frame folded from the same sheet of pape...
This star by Shuzo Fujimoto uses the same rays as his Handle (CFW 133) but the tessellation molecule is that of Hemp Leaf (CFW 88), same as independently cre...
This design is a modification of Triangles so that the tessellation becomes flagstone. At first glance, this change is more visible on the back side than on ...
The outline of this star is made using the same technique as various Star a la Fujimoto variants. The decoration in the center is a tessellation molecule tha...
This is one of Shuzo Fujimoto’s designs that include the word skeleton in their names. They are corrugations, aligned into 3D structures that look like inter...
The molecule of this tessellation is made from a modified hex twist and represents a unicursal hexagram which is an interesting geometric shape that has also...
A better fold of Shuzo Fujimoto’s star Scissors (CFW 87), from a larger sheet. Front and back have the same outline, but the number and arrangement of paper ...
This star consists of a CFW 91 molecule folded in the center of a hexagon with 6×6×6 grid, giving it additional rays around the molecule. This work is folded...
This was my first clean fold of Shuzo Fujimoto’s CFW 106 star, from a sheet of printed Washi I received courtesy of Satoko Saito for the Year of the Ox. Unfo...
A comparison of two folds of CFW 106 side by side: one from patterned Washi and the other from plain color Tant. Patterned paper, though very nice, made it i...
I designed this star in July 2022 while resting at the Stóg Izerski mountain hut, hence the name. Originally, I used a napkin for folding, so this star is fo...
This design is the hexagonal analogue of Mountain Hut Star. The back side, which in the version from square is not very interesting and mostly about just hid...
I found out that Shuzo Fujimoto’s molecule used in his CFW 91 star, can be changed into a fractal. By pulling some paper outside in the center, you can get a...
The complete set of seven Tetris pieces, recreated in origami using the business card cube module. Of the seven pieces, six require the same number of units ...
This tessellation (translucent design), designed by Shuzo Fujimoto, is not listed in any of his books or magazines (as far as I know). I discovered it among ...
I designed this model during a stop while trekking in the Sudetes mountain range in the summer of 2022, as you can see in the picture of the prototype. A few...
I think this is the last star from my 2019 modular star craze that I haven’t published before.
This model is one of Fujimoto’s few figurative origami designs, but a very distinctive one. I really like it for its simplicity and elegance. Despite being a...
A simple star folded from an equilateral triangle of thick washi paper.
This star looks similar to Daffodil (CFW 100) but incorporates a color change created by folding the corners of the hexagon inside as the initial step.
This is a simple star that incorporates a color change on the rays. It appears as an intermediate folding steps during the folding of Handle (CFW 133) and re...
One of Shuzo Fujimoto’s basic stars which consists of just a single tessellation molecule without any additional paper around it. As with some other models i...
Star a la Fujimoto III is a great way to showcase patterned papers, in this case an art nouveau themed gift wrapping paper.
One of Shuzo Fujimoto’s basic stars that consist just of a tessellation molecule with no extra paper around it, and can become more complex stars when decora...
A spiked icosahedron made from my Weird Asymmetric Sonobe (WASS) unit variant with color change. Since the color change’s symmetry is not aligned with the sy...
This design is a variant of Shifted Bricks. Every other brick in each row is of different length. Since the rows are shifted relative to each other, if you l...
In 2021, I went back to my Cross Lap Unit (CLU) from 2016 and folded this ampersand (&) character. The ampersand symbol, which is, strictly speaking, nei...
This is a fold of just a simple Four-Sink Base Tessellation but with additional space of one grid unit between molecules. Folded from a sheet of red Nicolas ...
Another design from my 2019 modular star phase.
In early 2023, I went back to an idea I had in 2016 to make a modular daisy out of bent modules, all connected in the center of the flower. My first attempt ...
While called Daffodil Variant B, this design is actually a variant of Daffodil Variant A (CFW 101) rather than a variant of Daffodil (CFW 100). This is becau...
This box is decorated with a ladybug, which is a tessellation molecule. I used the same molecule for a BBU tile variant to make a decorated cube. While the f...
This polyhedron is like a regular octahedron whose each face was replaced with a triangular pyramid pointing inwards. The three faces other than the base are...
This model is derived from my Star a la Fujimoto variants, which can be seen on the petals. I think for this model three-dimensional shaping with curled pet...
This “translucent design” by Shuzo Fujimoto is an example of iso-area tessellations: both sides have the same pattern (except for rotation). The point below ...
A modular recycling symbol, my design from 2021. Mathematically speaking, it is a Möbius strip. Folded from three units, each forming one corner of the trian...
This snake is just a strip of paper that I cut off the side of an A4 sheet with a hex grid so that an integer even number of grid divisions was left on the r...
This tessellation consists of alternating layers of two types of elements that differ significantly in their appearance and complexity. The folding sequence ...
Derived from Woven Triangles Tessellation II, this pattern has a number of creases converge at the center of the molecule. Sharp outlines of 90° triangles in...
This is a tessellation many origamists discover independently, though Fujimoto was probably among the first to do so. This tessellation is not featured as a ...
This star by Shuzo Fujimoto exhibits hexagonal symmetry and a color change. Basic Zinnia is CFW 196 while CFW 187 is a variant with differently shaped petals...
This tessellation is just slightly modified back-twisted square twists, but it looks quite nice anyway, especially in backlight.
Design derived from Box with Woven Triangles XVIII by rearranging layers.
Star a la Fujimoto III looks particularly interesting when folded from paper whose pattern has hexagonal symmetry.
In this variant, the rays are layered “one on top of the other” rather than “every other one in a different layer”. This changes the appearance of the front ...
Who says tessellations have to be flat? Even tessellations with flat molecules can be warped and twisted into various interesting shapes, and one technique t...
I folded this box in order to test John Gerard’s pure flax white paper. You can read more in my review of this paper.
Each link of this chain is a Möbius strip folded from a single CBU unit, essentially a Möbius Strip V (CBU). For a chain with regular, round links, see Chain...
When preparing my workshops for the German Origami Convention (coming up in slightly more than a week), I improved upon my original precrease for the Sol mod...
These pictures show sixteen boxes decorated with tessellation molecules belonging to the Woven Triangles family, folded in the years 2020-2021. All boxes wer...
This is another approach to the subject I already presented in Well I, with the central square being larger and the arrangement of bricks around it having ax...
This is just a single long Conveyor Belt Unit (CBU) wound into a coil, but it looks like the Tower of Babel in Bruegel’s painting or the Guggenheim Museum.
I designed this origami tie in order to illustrate a point I’m going to make in a not yet published part of my series on origami classification. The point is...
This model is just a friendly reminder that almost any tessellation can be transformed into a BBU tile, and combined with other tiles to create 3D shapes wit...
This star, designed by Shuzo Fujimoto, has an unusual symmetry, and an interesting color change. Folded from a small hexagon of Washi Deluxe, a duo-color, wr...
This elegant star of hexagonal symmetry looks best in back light or when folded from thin, semi-transparent paper. Designed by Shuzo Fujimoto.
A model from September 2020, this is a 3D-shaped variant of Woven Triangles Tessellation VI, folded from the same sheet as the flat-shaped one. Pulling some ...
This is just a very simple tessellation on a hex grid. My first fold was indeed an improvisation, folded from a plain white sheet. This one is a refold in wh...
This design by Shuzo Fujimoto is a regular pentagram star. It uses a single cut in addition to folding.
This wireframe vase is not very practical as a container, but the design is interesting. It can be used to hold a tennis ball in place and prevent it from ro...
A simple modular star I designed in 2019. I used paper with a heavy pattern which unfortunately masks the crease lines to such degree that practically only t...
This tessellation is based on a hex grid but the symmetry of molecules is triangular. This is also the reason the whole model is not a fully symmetric hexago...
This design by Shuzo Fujimoto represents a katniss flower (Japanese: おもだか, omodaka, also known as arrowhead in English). It falls somewhere halfway between a...
The inspiration for this design came to me from viewing the back side of Star a la Fujimoto III. Later, I found out that Andrey Hechuev earlier designed a te...
Comparison of three related Sonobe variants of mine, from left to right: Paper Airplane Sonobe, Checkered Sonobe, and Bow-Tie Sonobe. Each icosahedron is fol...
In this tessellation, rectangles are arranged in layers around a central square. I called it Well since it reminds me of a perspective view looking down a we...
This model is derived from Box with Woven Triangles II by sinking one edge of the triangle which results in a striking pattern of triangular flat islands bet...
This star, designed by Shuzo Fujimoto, has untypically shaped rays which make it look like the handle of an old tap. CFW 174 is a minor variant of CFW 133.
I designed and folded this simple origami tray in 2017. Due to the way the bottom is structured, it could also be used as a picture frame. The tray is square...
It’s been a while since I posted a modular star design, so here is another, from late 2019 when I was very much into this genre. This one has octagonal symme...
This heart I designed recently is very simple, but I haven’t noticed an identical design anywhere so far. The name on one hand comes from the fact that there...
The tessellation molecule decorating this box is one of many similar patterns I designed after my visit to CfC conference in Zaragoza in February 2020. While...
This star by Shuzo Fujimoto combines a central molecule taken from CFW 56 Tessellation (or Windmill, CFW 84) with sharpened rays which mimic a very similar p...
This is a collections of my origami tessellations that I framed and hung near the desk I use for folding. The models, all kept in neutral colors, are as foll...
This winter hat features a crane on the forehead and color-change “fur” around the face. You can tie the side panels below the chin, ushanka-style, or leave ...
I photographed this model ten years ago, in January 2013. It is just a simple tetrahedron folded from Francis Ow’s 60 degree unit. What makes it more interes...
A simple question mark wet-folded from a strip of watercolor paper. The dot is based on the same idea as the iris of the Eye.
This is my tessellation of Shuzo Fujimoto’s CFW 87 Scissors. Each molecule can be rotated independently of others. As far I’m aware, Fujimoto himself never t...
This design was inspired by the Polish poem Reduta Ordona (Ordon’s Redoubt) by Adam Mickiewicz, loosely based on events of the 1831 Russian assault on Warsaw.
This year’s model of the Star of Bethlehem for Epiphany is based on my Star of David I molecule. The model as a whole is very similar to Epiphany III, the di...
This origami tessellation represents the number 2023 using Maya numerals as 𝋥𝋡𝋣. This system is vigesimal (base 20) and individual digits are read top-to-bot...
This model belongs to a series inspired by the work of Shuzo Fujimoto. The outer edge is made with a general technique I devised that can be combined with di...
This is a recursive version of Shuzo Fujimoto’s Scissors (CFW 87). I wanted to call it Biohazard Fractal since it resembles the biohazard symbol, but later d...
This is another fold of Scissors Fractal, a recursive model I derived from Shuzo Fujimoto’s Scissors (CFW 87). In this fold, the direction each level rotates...
A comparison of two variants of Scissors Fractal: one with consistent rotation direction for all levels and one with alternating rotation directions.
This Rosette variant looks like holly leaves.
This design is pretty much like Box with Woven Triangles XII but with different layer ordering. The change results in the triangles being covered by pleats a...
This box, designed in late 2020, is decorated with a shamrock, and folded from a single square of Tant paper. In contrast to most of my box designs, in which...
This star is one of my favorite designs by Shuzo Fujimoto. Both sides look almost exactly the same apart from the side I call front being a bit thicker than ...
Top edges of this box look as if they were chipped, hence the name. The whole top area is a tessellation molecule, derived by a simple change from the base t...
This box is decorated with a single molecule of Fat Propellers Tessellation. I designed the molecule and folded a box decorated with it no later than 2017, a...
This tessellation, designed by Shuzo Fujimoto, is almost identical to my John Lackland Tessellation except for using petal folds instead of simple valley fol...
Yet another way to beautify your toilet paper roll.
This fold of Woven Triangles Tessellation VIII uses larger spacing between the molecules than the previous one, resulting in a different looking model. Gone ...
Shuzo Fujimoto’s star with twelve rays, folded from a hexagon. See Maple Leaf (CFW 149) for a counterpart folded from a square and a list of variants made fr...
Since today is Polish Independence Day, I’m publishing a picture of my Hedgehog Star III folded in Polish national colors. This work uses a proper color chan...
I was inspired to design the molecule of this tessellation after spending a lot of time analyzing various designs of Shuzo Fujimoto’s stars. Since pleats in ...
I folded this Seal of a Secret Society from Clairefointaine Maya paper for the sake of creating a phototutorial on this model.
This star, designed by Shuzo Fujimoto, is based on a square twist and has eight rays. Its hexagonal twist counterpart (with twelve rays) is Chrysanthemum (CF...
A characteristic feature of this star are “slits” (of course, folded rather than cut) which separate rays from one another and make the center of the star ve...
This star by Shuzo Fujimoto has a decoration made from six radially aligned petal folds in the center. After minor modification, it can be tessellated (I’m n...
This star by Fujimoto is basically the same thing as CFW 87 but folded from a 6×6×6 grid, which results in more paper around the central molecule and a diffe...
After I designed this tessellation, I learned that Shuzo Fujimoto had designed the same thing about 40 years earlier. This was the first time such independen...
This star based on a hex twist and designed by Shuzo Fujimoto has double the normal number of rays. It can be fitted with an additional “ribbon” (made from a...
This is one of Fujimoto’s translucent designs, a name he used for many of his tessellations. Folded from rare blue Elephant Hide paper, this work is not very...
In this model, the four triangles located around the center of the molecule are located below other layers of paper, only partially peeking outside. Triangle...
While my first fold of this variant was from a 16×16 grid, this one is from 32×32, which produces many more molecules and better shows how squares of two siz...
The name of this design by Robert Lang is a little origami joke. It references two creators, Shuzo Fujimoto and Rebecca Gieseking, and it does indeed combine...
I came up with this design due to folding lots of stars by Shuzo Fujimoto recently. Since this is not the first time new ideas pop up based on his works (thi...
This is one of Shuzo Fujimoto’s translucent designs. For my personal use, I call it Stars and Triangles as an analogy to Stars and Squares which is the same ...
A follow-up design to Hedgehog Star II from February. There is a color-change, but in this fold I used two kinds of metallic paper, each same color on both s...
A star by Shuzo Fujimoto. The front looks as if woven from mutually intersecting triangles while the back is rather plain. A very similar model, CFW 120 loo...
This star by Fujimoto is broadly speaking a level-2 Lucky Star Fractal folded from a slightly smaller hexagon so that there is less paper available on the ba...
This model from Woven Triangles series features a frame that surrounds the four interwoven triangles in the center of the molecule.
A very simple star designed by Shuzo Fujimoto. Folded from an equilateral triangle, but the star itself has hexagonal symmetry. This models seems to have al...
This design by Shuzo Fujimoto is an early example of an iso-area tessellation, i.e. one which looks the same on both sides, apart from possibly rotations and...
Spiked icosahedron, folded from my Checkered Sonobe units.
At one point I thought I’d design an origami flasher. Unsurprisingly, since I went for the simplest possible idea, I ended up with a design which had been in...
This origami flasher snaps into a hyperbolic paraboloid when unfurled. The center is based on a set of twists similar to those used in the Pythagorean Tiling...
This Rosette variant resembles a screw propeller like those found on ships.
This tessellation is closely related to the 1:1 Pythagorean Tiling, but the twists are slightly different. Still, the design remains iso-area. The squares an...
One of the classic tessellations from a hex grid, first published by Shuzo Fujimoto. It uses molecules of two types, hex and triangle twists, and understandi...
One of the simplest among Fujimoto’s stars. This design is folded from a square, but only a hexagonal part of it is used (this technique is CFW 414). CFW 84 ...
The Hypar is usually folded starting from a complete grid, but precreasing it cleanly is rather straightforward. This design is very elegant, so I’m includin...
This star would have been simple to fold were it not for the final folds that create the small hexagon in the center. These folds on each side should be perf...
In this variant of my Z-Box, the serifs on the letter Z are truncated and the letter has a more rounded look. At the time I designed the original and the B ...
This is variant C of Braided Pinwheel Tessellation. The molecule looks like a combination of variant A and variant B molecule. There are quite a few layers o...
My Framed Heart, folded from the rare red Elephant Hide paper in late 2019. The heart can be tessellated, but I haven’t folded it this way in practice yet.
This is one of Fujimoto’s famous translucent designs — tessellations designed to be viewed in back-light. Fujimoto folded them using thinner paper than the K...
This variant of Woven Triangles is very similar to number XIII except for the pleat visible on the box’s side having a different layer ordering.
This star is as simple as it gets — literally just a single rearranged hex twist made on a hexagon of the right size relative to the twist’s central hexagon.
This is an alternate way of laying out molecules of Parallelograms tessellation. Because of how the pleats exiting the molecule are arranged, it is possible ...
Folded from Nicolas Terry Tissue Foil for its good memory and thinness. The glittery texture looks very nice in real life, but makes the model difficult to p...
This star is folded from a hexagon but has triaxial symmetry which reminds me of the biohazard symbol. Compare with CFW 103.
Another fold of Hedgehog Star II, once again in Ukrainian national colors since symbolizing Ukraine’s resistance in the face of Russia’s aggression was the r...
The way pleats exit the Parallelograms molecule allows the molecules to be connected in more than one way. In the standard Parallelograms layout, individual ...
When I originally folded Parallelograms in 2020, I designed a clean pre-crease pattern, pre-creased the sheet, and then… was unable to collapse it cleanly. I...
A variant of Star Phobos that has additional decoration in the center of the star on the front side.
A modular star I designed in early 2020. There are several ways in which the units can be connected, of which the one shown here is most stable. Since the la...
A regular octahedron from one sheet, by Shuzo Fujimoto. This design is very paper-efficient, and surprisingly sturdy given how little paper is wasted on the ...
This Rosette variant is “flattened” and has lower rotational symmetry than most others.
A star from square twist that uses a similar technique as the Dahlia for shaping the petals. It can be seen as a single molecule of Propellers Tessellation (...
One of Shuzo Fujimoto’s many stars. Folded from a hexagon, but the number of rays is twelve. There is a design from a square (CFW 150) that uses a similar te...
This version of Woven Triangles molecule looks very similar to Woven Triangles I at first glance but has a different arrangement of pleats. These seem to ci...
One of Shuzo Fujimoto’s stars, based on a hex twist whose central hexagon has a side length equal to ⅓ of the hexagonal sheet’s edge.
One of Shuzo Fujimoto’s stars, based on a hex twist whose central hexagon has a side length equal to ⅓ of the hexagonal sheet’s edge. Folded from uncoated Kr...
This is the coat of arms of the city of Mariupol where fierce fighting in the Azovstal iron works is currently taking place. It is not surprising for a port ...
This tessellation differs from most other designs by having lower rotational symmetry: only 180° rather than the 60° typical for tessellations based on a hex...
This hexagonal box by Shuzo Fujimoto uses his typical technique for locking the bottom with folds that resemble an iris diaphragm. He also devised similar de...
A very simple variant of Fujimoto’s Hydrangea, which does not seem to be popular among folders so far.
Decorating Easter Eggs is a popular Easter tradition in Poland, Ukraine, and other Slavic countries. This one is folded from a single sheet of paper rather t...
A Rosette variant which resembles the Spring Sun. Back side is quite interesting as well.
Originally, this work was supposed to be a joke, and to get a punny title such as Vertebral Column or Ribbed Column. However, while I was working on it, my v...
This is a very simple and elegant traditional model: a ninja star you can actually throw quite well. With just two units it’s also one of the simplest modula...
Another flat variant of Rosette. This one’s outline is much less round than that of others, hence the name. Especially when framed in an asymmetric manner, t...
This is a very simple design, not the kind of twists used in tessellations. Still, I think there is certain elegance to it. I find it hard to classify this m...
A regular hexagonal star folded from a single square. A simple and elegant design by Shuzo Fujimoto.
Another fold of my Close-Quarters Folding tessellation, this time from 20×20 grid which gives the central part with small squares and the margin of larger sq...
This variant of Rosette is called Maltese Rosette because the outline of its “petals” resembles a Maltese cross. In contrast to the plain Rosette, which is 3...
Another fold of my Woven Triangles Tessellation V, this time from purple Ogawa Washi paper. It is physically the same sheet which later became Woven Triangle...
A variant of Fujimoto’s Hydrangea, called Brick (レンガ, Renga).
This cube, folded from a single square, is one of Shuzo Fujimoto’s most famous designs. Not only is the model very firm, but the folding sequence is a master...
This is a very simple modular star, this time with square rather than hexagonal symmetry. It looks a bit like a compass rose with only the four cardinal dire...
It took me a while between folding a box decorated with a single molecule and folding a complete tessellation. What you see here is my third attempt as I was...
This is a single molecule which can be tessellated. It is made from a molecule of Whirlwind Tessellation placed inside a larger one. More than the two levels...
The Coat of Arms of Ukraine, called the Tryzub (Тризуб), Trident. This rendition in origami is simplified due to limitations of the medium and time. The powe...
The Flag of Ukraine — a single fold on a square of yellow-blue duo color Kami paper. This way of folding national flags consisting of two parallel stripes is...
I designed and folded this spiked origami star bearing Ukrainian national colors last Monday night, after Putin’s speech. The design has a color-change, but...
In line with the distinction made in my post on naming origami models, this design is called Brick Road while the particular work seen here is called Yellow ...
The 62 Knot is one of three prime knots with crossing number six. Though not as well known as the Trefoil Knot, it is also quite interesting. This origami ve...
A design from 2017, this tessellation features hearts created from slightly modified square twists.
In this Woven Triangles variant, pleats are not locked as strongly as in others, which will probably make folding a real multi-molecule tessellation neatly h...
This tessellation, folded back in 2019, consists of series of rhombi. I do not use patterned paper much, but this time I decided to give it a try and folded ...
When you fold variants of my Lucky Star Box, you can extend the star to its fractal form. This particular variant emerges when you apply that procedure to th...
This design emerges as one of intermediate stages during the folding of Rosette. I find its extreme minimalism very compelling. This particular work is from...
This variant of Star Ananke has additional little rays in the center.
This origami Rosette is a tessellation molecule (14×14 grid for the molecule, 16×16 for the whole work shown here), but I haven’t folded a model of more than...
This box is decorated with a tessellation molecule representing the letter Z. Though it may not be obvious from its looks, this design is closely related to ...
Happy 2022! This is my first fold of the year, and as usual I wanted it to be something related to the new year. Since 2022 has a rare symmetry when rendered...
You can assemble a simple Christmas tree from multiple Fortune Tellers (which you probably already know how to fold). Each Fortune Teller is smaller than the...
This origami kaleidocycle is an example of a flexible polyhedron, and an action origami model. You can see the cycling action in this video by Ed Holmes, in ...
In this member of the Woven Triangles family, the triangles have different proportions than the √5:√5:√10 sides found in most other variants.
This box features a tessellation molecule which I called Shy Flower. I derived it from my earlier Braided Pinwheel Tessellation. The flower is 3D and its mos...
In contrast to my earlier trefoil knot from CLU unit, which used a more elongated strip of paper and was shaped more like a clover, this trefoil knot is fold...
In March 2020, shortly after the CfC2 conference, as the pandemic was just taking off, the origami Community for Creators started organizing online origami m...
This Whirlwind Box is folded from a full 16×16 grid on copy paper. You can have a look at a fold from Tant paper and without the grid for a comparison of the...
In the description of my recent Hydrangea Tessellation fold, I mentioned that I had recently experimented with different variants of the “leaves” which form ...
This is the first box in the Woven Triangles family to be based on a structure modified by twisting the square on the back side of the molecule. This also ma...
This model, representing a hyperbolic paraboloid, is thought to originate from the paperfolding experiments at Bauhaus in the late 1920’s. However, details o...
This Möbius strip is made from a single Conveyor Belt Unit (CBU), just like Möbius Strip V, but the ends are twisted additional 360° before being connected. ...
Believe it or not, over all these years of folding tessellations, I never folded a clean tiling of Fujimoto’s Hydrangea. I recently decided to make up for th...
This fold of Shifted Bricks is folded from a full 16×16 grid, so you can see grid lines on the bricks. Such a smaller version is what we can fold during work...
Despite similar looks, this tessellation is not Momotani’s Wall — it is a different pattern designed by myself. Its relation to Momotani’s Wall is roughly su...
This cup is a design derived from Lucky Star Box (Simplified) Variant B and the PreCP (Precrease Pattern) is the same. The paper used to form the star in the...
Yet another variant of Sawtooth Box. This vaariant is almost identical to Tilted Square Box by Tung Ken Lam.
This ring uses a set of simple pleats for its jewel. This technique, somewhat similar to Goran Konjevod’s, made me think of Art Deco style, hence the name. T...
A variant of Star Eris with modified center.
Yet another simple design from the time I got into modular origami stars. Unpublished version 1.0 used a less effective lock between the units.
Miura Ori is probably the best known origami corrugation. While the model is named after Koryo Miura who designed a variant which was later used for folding ...
This is a simple modification of the Miura-Ori, with left and right legs at each vertex being different lengths. I later refolded this model into The Cliff, ...
This is variant B of my Lucky Star Box (Simplified). It is derived from the basic variant by pushing inside the box the empty areas around the star, which va...
This classic model, often referred to by the name Momotani’s Wall, is an example of an iso-area tessellation: the front and back display the same pattern. In...
A Möbius strip consisting of a single Conveyor Belt Unit (CBU) twisted and locked with itself by both ends. This is the cleanest representation of a Möbius s...
A conveyor belt, made from Conveyor Belt Units (CBU). Instead of connecting the ends together, one could also leave the model in the form of a flat tape, or ...
When I was little, it was common for kids to make paper chains as Christmas tree decoration (łańcuch na choinkę). These chains were made by cutting colored p...
In this variant of Star Deimos, units are modified so that there is no pocket in the top visible layer. This requires a change to the locking mechanism and r...
Another fold of Shuzo Fujimoto’s Hydrangea. I’ve kept two outermost leaf layers free of unnecessary creases. For deeper layers, it becomes much harder.
A trefoil knot from a single Cross Lap Unit.
This model, which includes tessellation elements, has a 3×3 field of squares which reminds me of a tic-tac-toe game board. The pattern is based on Square Pix...
This fold of Double Spearhead Tessellation with 6×6 molecules (24×24 grid) looks most interesting in back-light due to the fibers of mulberry paper becoming ...
This is a model folded back in 2018 which I somehow forgot to post earlier. Each molecule of my Double Spearhead Tessellation can be modified by sinking any ...
Another cube from BBU-s: 6 × E7, 6 × D4 6 × A1.
A spiked icosahedron made from Weird Asymmetric Sonobe (WASS) units.
As in Box with Woven Triangles VII, in Box with Woven Triangles VIII the triangles are located below other layers of paper and only partially peeking outside.
Another approach to designing an origami Python logo. This model is folded from two separate sheets, which allows the snakes to be different colors and have ...
The units from which this star is made, are folded from triangles whose angles are 30°, 60° and 90°. Such triangles are created when you cut a hexagon from a...
This is the prototype fold of Parallelograms Tessellation. It’s quite representative of my design technique: a quick doodle on a small grid and a rough sketc...
A variant of Star Deimos in which the rays are asymmetrically narrowed on one side, giving the star’s outline the appearance of a saw blade.
This design is my modification of Shuzo Fujimoto’s Hydrangea. Despite the change being very minor, it allows the model to be shaped in a more three-dimension...
When folding this box, I thought I was making a clean fold of Box with Woven Triangles XVI, but I missed one detail and ended up with yet another design. You...
Another pattern in the Woven Triangles Family. This particular work uses standard, flat shaping but a different, three-dimensional shaping is also possible. ...
When I published my origami Scala Logo a while ago, user slinkousart asked if I could design a Python logo as well. Turns out, I could, and I even designed t...
This is my design for a monument to the traditional origami crane. I envision it executed in grand size, standing on a public square or in front of an origam...
This is a simple box with a molecule of Woven Triangles Tessellation I. My first attempt at folding this model resulted in a slightly modified molecule and e...
I designed this model for the cover illustration of my father’s book on nanoparticles. It represents the structure of SBA-15, a type of mesoporous silica. My...
A variant of Pythagorean Tiling with 1:1 size ratio between the sides of the two types of squares. This effectively makes the pattern uniform (all squares ar...
Variant B of Star Deimos differs from the base shape only by a single fold which reveals more of the white side of the paper in the center.
Spiked icosahedron, folded from my Bow-Tie Sonobe units (also independently designed by tomoko07011209 around the same time).
This is my second approach to designing a Scala logo. With different colors, it could also be interpreted as Ericsson logo.
Another approach to the subject of Maltese Cross. The molecule can be tessellated or used on a box as in this picture (I haven’t folded a multi-molecule tess...
After a book with a face on the cover (called Biography), I designed a book with a Maltese Cross on the cover (aptly called Bible). This model’s design is ba...
This model is based on Square Pixel Tessellation, and is closely related to my earlier Composition of Squares I.
A Framed Heart, folded from black Goat Skin paper.
Ten level-3 Lucky Star Fractals, folded from metallic paper in different colors. This is just a small subset of how many times I have folded this model over ...
In this variant, the triangles are located in a deeper layer of paper, as if peeking through an opening in a wall.
Just as is the case with Predictable Box I, the purpose of Predictable Box II is to have predictable inner dimensions, which in turn makes it possible to use...
This is a model I designed and folded back in 2016. It is made from the same kind of units as Single-Module Modular Heart. Any number of units can be used si...
This variant of Sawtooth Box looks most similar of all my variants to the designs of two authors who had an almost identical idea before me (see the main var...
Traditional Masu Box, often used as an example of a simple origami box.
This is, along with Clover Folding, one of the oldest pictures of a tessellation folded by me (taken in June 2015).
Along with the Hydrangea, this is one of the oldest picture of a tessellation folded by me (taken in June 2015).
Along with the other Clover Folding model, this is the oldest picture of a tessellation folded by me (taken in June 2015).
This was an experiment with yet another PHiZZ variation of mine, conducted a few years ago. I chose too soft paper (or too large sheets) for this model which...
This is just a simple Hydrangea, designed by Shuzo Fujimoto, but I think it looks really nice in back light. Folded from Grünperga Kristall Prägo, a kind of ...
Another variant of Sawtooth Box. It differs from variant A by having the triangular flaps locked to the walls of the box. This creates a nice diagonal color-...
This is a simple box with a color change. I designed several variants (posts coming up), most with the triangular flaps (“saw teeth”) locked onto the walls. ...
After a break, I’m back to presenting variants of molecules from the Woven Triangles tessellation series. Again, it’s a single tessellation molecule used to ...
Another simple model in which a cube is built from just two units. See also: Two-Unit Cube I.
Model folded from transparent book wrapping fold which shows the internal structure of the model in an interesting way. Have a look at the detailed review of...
Spiked Icosahedron made from my new Sonobe variant, Paper Airplane Sonobe. When you look at an individual unit before assembling the model, you can spot a re...
Logo of Scala programming language in origami. Folded from a single 2:1 rectangle of Kami.
A minimalistic self-similar origami design, in the style of Edward Mistretta’s recent works.
This model is just a tessellation of Crossed Box Pleats: the back side which you see here is the Crowding Butterflies model by Shuzo Fujimoto. You can notice...
My Heart Bracelet II alongside the Traditional Bracelet with Squares from which it is derived.
I designed this simple bracelet with hearts based on a traditional bracelet that has a decoration of squares (check out a comparison of these models).
My idea behind this tessellation was designing something easy to learn for beginners but at the same to make it reasonably well looking. The models I have us...
Woven Triangles Tessellation V, folded from Elephant Hide paper. 32×32 grid for the whole model, 8×8 per molecule.
This model is the same as the first Pythagorean Tiling variant I folded, but the side length ratio of big squares to small squares is 3:2 instead of 2:1. As ...
This model took me longer than I expected, but better late than never, so: happy New Year 2021! This model uses a new tessellation molecule of mine which I h...
I derived this design from my Shamrock 1.1 Box. Just like the former, it can be tessellated. It is named after a rare flower which grows in the mountains.
This is a very simple modular origami design I recently came up with when revisiting my Oxi unit from a few years ago. The unit has folded edges on one side ...
If you wear glasses like me, you are probably quite frustrated by the fog which the mask creates on your glasses, especially in winter. This simple origami d...
Wolf Medallion from The Witcher series. Folded from a hexagon of metallic paper.
Woven Triangles Tessellation IV — this is the only variant in the series so far which uses a 10×10 grid per molecule rather than just 8×8.
This box is decorated with Whirlwind molecule which can also be used for a tessellation. Its design is closely related to my Woven Triangles family, but I ga...
Woven Triangles Tessellation III, the symmetric layout with molecules of two different chiralities.
Third work in the Woven Triangles series. Just like number I, number III has a pleat arrangement which allows for two distinct molecule layouts: the asymmetr...
This origami book features a portrait on the front cover, so I called it Biography. The structure of the book is basically the same as in my Long Story Short...
Just like all other models in the series, this origami tessellation is derived from Rectangle and Square Flagstone by applying squash folds in the right plac...
A new fold of my Shamrock 1.1 Box — compared to the previous one, I managed to fold and shape the stem in a cleaner way. The shamrock can be tessellated.
Yesterday, my employer, Allegro, went public in what was Poland’s largest IPO so far and Europe’s largest this year. Hopefully, the charts continue growing a...
This model uses the same molecule as the symmetric version but all molecules have the same chirality. This causes each row and each column to be shifted by t...
This is the first model in my Woven Triangles series which you’ve already seen some examples of on boxes. This tessellation is derived from Rectangle and Squ...
This origami tessellation is built from the same kind of molecule as Pythagorean Tiling but molecules are arranged differently: in any pair of adjacent neigh...
Another simple origami container whose bottom is not flat. It looks like a green mound, on top of which you can place a plant or some other object.
A simple geometric origami container whose bottom is not flat.
The pattern this origami tessellation represents is known as Pythagorean Tiling or Two Squares Tessellation. I came up with this design independently, but it...
Triangles, folded from 32×32 grid. Since the molecule is 8×6 grid units, this leaves one grid unit of margin at the top and at the bottom of the model. You c...
Recently, I gave an Origami Connect workshop on my origami book model Long Story Short. Preparing for the workshop motivated me to revisit an idea which I ha...
Another member of the Woven Triangles family, single tessellation molecule on a box.
This origami box is decorated with a tessellation molecule from the Woven Triangle family. In contrast to Woven Triangles I, II, and III, Woven Triangles IV ...
This is the third tessellation pattern in Woven Triangle family, and it looks good as a single molecule on a box as well.
Another box with a tessellation molecule from the Woven Triangle family.
Naming this box, the first in the Woven Triangles family, was a little misunderstanding. I originally labeled it number I since it was the first to be publis...
Recently, I came up with a family of patterns which result from placing four modified twists around the corners of a rectangle or square. Some variations are...
Variant B of my Star Chaos. Modular origami model from 6 units. Duo paper courtesy of a friend.
This origami tessellation is derived from my earlier Parallelograms Tessellation. By piecing together two symmetric “halves” of a parallelogram, we end up wi...
This is an older design I finally got some time to make a decent fold of (have a look at the prototype from 2017). I’m pretty sure I’ve seen something very s...
This origami tessellation is based on a geometric pattern I spotted on a door in the Barcelona Cathedral during my trip back from CfC 2 convention. A design ...
The base for this tessellation is identical to one of the intermediate steps of folding Lucky Star Tessellation and seems to be something Tomek Siwak also ca...
Star Deimos, another of my simple modular origami star designs. There is a color change in the center of the model, and the six-fold symmetry allows for seve...
A recent fold of my Two-in-One Flower Tessellation. Even though there is only one kind of molecule in this model, depending on which point you treat as the f...
I recently stumbled upon an older model of mine, Growth Tessellation, in one of my boxes, and I decided to rework it a little. I added just a few touches whi...
Doom Eternal is coming out tomorrow, so here’s an origami version of the cover art of the first Doom game from 1993. Origami from a single square sheet, no c...
An octagonal modular star. Own design, folded from Harmony paper.
This model is based on a simple technique which I used also in Growth and Square Pixel Tessellation models. Other interesting arrangements, with more or less...
Yet another variant of Star Ananke. Variants of this design were designed independently by myself and by others before me: Wei Fu, and Robin Glynn (with mino...
The technique used for this hexagonal box can be used for other polygons as well, resulting in boxes with a different number of sides. However, the minimum n...
Quake, released almost 25 years ago, was a major revolution in the first-person shooter genre. The first game of this type to represent reasonably realistic ...
This variant of Star Ananke features an additional hexagon in the center of the model. It’s a small change in the individual unit, but it makes connecting th...
This origami tessellation was inspired by a pavement pattern I noticed some time ago in my home city of Lublin, Poland, at the old cemetery and in the open-a...
This is the front of Star Ananke, variant D. The basic variant (A) was designed independently by myself and by others before me: Wei Fu, and Robin Glynn (wit...
This is the simplest recursive/fractal model I have come up with so far. It is folded from a square. Due to the very high shrinkage factor, which is almost 4...
This model is derived from my Radioactive Tessellation by adding a triangular frame around the radioactivity symbol. This change also makes it possible to sh...
This very simple model is folded from an equilateral triangle, and based on a pattern which corresponds to the hypar but on a triangle grid. You can use this...
This is the back side of Star Ananke (variant D). The basic variant (A) was designed independently by myself and by others before me: Wei Fu, and Robin Glynn...
This rendition of the Star of Bethlehem is based on the same general idea as Epiphany III, but made to better resemble an actual comet. It features a double ...
Happy New Year 2020! Here’s an origami tessellation with the number 2020, folded from a 2:1 rectangle of Satogami paper.
Alpha and Omega. The beginning and the ending. The first and the last. Origami wet-folded from a strip of watercolor paper.
In contrast to Two Hearts Framed, this model is very simple to fold. The paper used was a 4:1 rectangle of Biotope.
A modification (variant C) of Star Ananke. The basic variant (A) was designed independently by myself and by others before me: Wei Fu, and Robin Glynn (with ...
I designed this model as a wedding gift, starting out from my Framed Heart model.
I prepared this composition as decoration for the room where I would be holding origami workshops related to my exhibition at Olsztyn Planetarium. During the...
A recent design of mine, this tessellation is relatively simple to fold, but the end result looks quite interesting. On the back side, I used some modified t...
Modular origami stars are quite addictive: I set out to create just one simple model for a workshop and before I knew it, I had about a dozen different desig...
This origami crucifix is modeled after icon crosses found in Byzantine art, but also present in other styles up to this day. A matching model for All Saints’...
I derived this design from my older Double Spearhead Tessellation. The name comes from the pattern on the front side.
A modification (variant B) of Star Ananke. The basic variant (A) was designed independently by myself and by others before me: Wei Fu, and Robin Glynn (with ...
Box with a heavily stylized Maltese Cross. The molecule can be tessellated or used on a box as in this picture. This design uses my Flagstone Paneling techni...
As part of preparations for my presentation and workshop on contemporary origami, I set out to design a simple modular star which I could teach in the worksh...
This tessellation is derived from Lucky Star Tessellation, but due to the different arrangement of paper layers, this one can’t be fractalized. The outline o...
This is a recursion of my Twisted Bird Base Tessellation. The recursive / fractal version looks interesting, but it’s rather hard to collapse.
Folding origami during a break at JavaZone 2019 after an interesting talk about JVM performance tuning by Chris Thalinger.
This model uses an improved version of my Broken Heart Molecule. I call this version simply Heart Tessellation II / Molecule (II because of a Heart Tessellat...
This model uses an improved version of my Broken Heart Molecule. I call this version simply Heart Tessellation II / Molecule.
Another approach to the subject of Maltese Cross. The molecule can be tessellated or used on a box as in this picture. This design uses my Flagstone Paneling...
An origami box featuring the heraldic Maltese Cross. The molecule is based on the one used in Maltese Cross Framed and a slight variation of the one used in ...
This is a level-7 Lucky Star Fractal, the largest number of levels I folded so far.
Making a tessellation representing boats on the sea had been on my mind for quite some time when I finally came up with this design. It represents not just a...
An origami box featuring the heraldic Cross Pattee. This model uses my Flagstone Paneling technique in order to achieve a completely clean space around the m...
An origami box featuring the heraldic Cross Pattee. This model uses my Flagstone Paneling technique in order to achieve a completely clean space around the m...
An origami box featuring the heraldic Cross Pattee. This model uses my Flagstone Paneling technique in order to achieve a completely clean space around the m...
An origami box featuring the heraldic Cross Pattee.I used the same molecule in Cross Pattee Tessellation, and just as the tessellation, the box also uses my ...
This is a tessellation of the Lucky Star Fractal. The standalone star was designed independently by several people, starting with Shuzo Fujimoto. I don’t kno...
Here is the first model in my tea tag origami series, a Tea Tag Heart.
This tessellation comes in two molecule variants. Despite being a kind of twist, molecules can be made to turn left or right independent of each other, i.e. ...
A simple origami box, based on my Woven Rhombi Tessellation. Folded from a sheet of unique paper with a subtle floral motif, whose name I do not know.
I derived this model from Her Majesty’s Tessellation by removing most of the free spaces (“land”) between molecules. Each molecule is still 6×6 grid units. F...
Just in time for St. Patrick’s Day, here is a new version of my Shamrock Box (previous versions: 1.0 and two simplified variants). Current version was design...
This is a tessellation of the molecule which I first used in Lucky Star Box and which I later extended into Lucky Star Fractal. As I learned after the fact, ...
This model is a variant of the Lucky Star Fractal (aka Logarithmic Star), designed by myself and independently by many others before me, starting with Shuzo ...
This origami tessellation, hand-folded from a single sheet of Biotope paper, without any cutting or glue, demonstrates my new approach to cleanly separating ...
In this tessellation, I used the same technique of doubling the number of a polygon’s sides as in Sad Octagons, this time making dodecagons from hexagons.
An extended version of my Blazing Propellers molecule, folded from 30×30 grid (32×32 for complete model with margin) rather than the standard 14×14 grid.
Another attempt at folding the subject of Star of Bethlehem, this time using the Lucky Star molecule (invented independently with Fujimoto, Haligami and many...
A simple box lid derived from a modified Propellers Tessellation molecule.
Unintuitive as it may seem, this tessellated Christmas Tree was born as a modification of a shooting star model, Epiphany III. The molecule used for creating...
A level-3 fold of Lucky Star Fractal, this time from gray metallic paper. I rarely fold a model multiple times, but this particular model is so nice I have f...
This is a recursive version of the Lucky Star molecule. Just like the non-recursive version, it can be tessellated or used for decorating a box. The back of ...
This is a modification of my Sunflower Tessellation. The molecules (“sunflower seeds”) are flatter and the petals are shorter. The back side is also more int...
Another fold of my Blazing Propellers Tessellation, this time 4×4 molecules (64×64 grid).
This origami tessellation combines elements from some of my other models. While reading Robert Lang’s tessellation book, I realized that many molecules can b...
Today, on November 11th, Poland is celebrating 100 years of regaining independence. This origami box which represents an outline of Poland is an example of t...
This model shows how the basic molecule of my Sunflower Tessellation can be modified in order to rearrange the direction the individual “seeds” are pointing....
This is a model I will be teaching in just two weeks at a workshop during the 2018 CDO origami convention in Italy. The star can be used as a tessellation mo...
It took me 1½ years before I decided to fold my Sunflower Tessellation once again, this time from rare yellow Elephant Hide paper. I think this is a better ...
Rhombus Fractal, an origami tessellation designed by Endre Somos (and independently also by Joel Cooper and by Wei Fu), folded by me. You may also find inter...
Mini-Sunflower Tessellation, folded from Kaiser (Stark) paper.
A bracelet with heart motif, folded from a single strip of red-gold duo color Washi paper.
A refold of my older design, Stacked Propellers Tessellation, this time as a complete tessellation rather than a single molecule. 64×64 grid.
This model uses a technique I came up with recently, which makes it possible to double the number of sides of any regular polygon when it is used as the cent...
This hexagonal dish is created as an intermediate step while collapsing my Sunk Star Box.
A new fold of my older model, with slightly different angles. As the name says, the molecule is a square twist with spread-sinks in the corners of the centra...
This is my variant of Edward Mistretta’s model, Phantasma Fractal. It’s a nice design which can be folded as a single molecule, or tessellated.
Origami box with Lucky Star molecule. The molecule can be tessellated and is based on hexagonal 8×8×8 grid.
A tessellation derived from my other model, Woven Rhombi. 4×4 grid units per molecule, or 8×8 if you want to consider a complete hexagonal tile a molecule.
Two folds of my Sunk Star Box with different twisting directions, side by side. Wherever there’s a twist in origami, we get two possible versions of the fold...
The star in the center of this box is a kind of twist which does not lie flat and therefore can form a box but not a tessellation. This model is a part of a ...
The star in the center of this box is a kind of twist which does not lie flat and therefore can form a box but not a tessellation. This model started a serie...
A modification of my earlier design, Double Spearhead Tessellation. Due to the double bottom with more paper layers, this model doesn’t look as nicely back-l...
A hexagonal variant of my Wedge Flower Box. Due to the different angles than in square grid, petals do not automatically align in a nice way, so they have to...
This box is decorated with a variant of my Wedge Flower molecule in which the central part is flat. Folded from Textured Paper from BOS Supplies.
A fold of my Box with Leaves (tip-to-tip) where the leaves were folded using a 32-division pleat instead of the usual 16 divisions. I taught this model at Ou...
A new, cleaner fold of my Box with Leaves (tip-to-tip). I taught this model at Outdoor Origami Meeting in Kraków, Poland, this year.
Origami box decorated with a molecule of my Wedge Flower Tessellation. Folded from Via Felt 100 gsm paper stained with tea using a technique developed by my ...
I designed this model, based on my Simple Elephant, for the wedding of two origami friends, Marcin and Natalia. Folded from a single 5:1 strip of red-gold Wa...
A new tessellation design of mine, 8×8 square grid per molecule. Awagami Kozo Natural Select paper courtesy of Melina Hermsen. Since this was my first fold u...
A larger fold of my Ridges Corrugation, folded from a 32×32 grid. Folded from the big grid, the model curls up more than the 16×16 version and can be used as...
A recent design of mine, a box with the Star of David, seen from the top. Folded from a single sheet of Tant paper without cuts or glue. The star can be tess...
This is a design derived from my Square Interlace Tessellation. A more precise name would be Pursed Square Interlace Tessellation but I found it too technica...
An origami tessellation for Good Friday. The basic structure of the Latin cross is based on Shuzo Fujimoto’s Hydrangea and could easily be modified to have d...
This is Her Majesty’s Tessellation (own design) folded from a 64×64 diagonally rotated grid. The spacing between molecules is less dense than in the 32×32 gr...
Sharpened Square Interlace Tessellation, a simple variant of my Square Interlace Tessellation. As in the original version, each molecule uses a 6×6 grid. Fol...
This origami box represents a flower of the genus Houstonia, also known as bluets or Quaker Ladies. Some species, in particular Houstonia Caerulea have four ...
A different arrangement of the same molecule as in my Dune Tessellation. Some other arrangements are also possible with a bit of tweaking.
My goal when designing this box was reusing the strips of paper which are left over when a square is cut off from an A4 piece of paper. This strip also happe...
Another fold of Her Majesty’s Tessellation. Folded from Elephant Hide paper, painted with copper-color acrylic paint.
Kropka Star, designed by Natalia Guzowska. I had the pleasure of test folding this model from soon-to-be-published diagrams. Paper with hexagonal symmetry pa...
A different fold of Ridges Corrugation. The back-lit view shows how the corrugation folded from a square ends up a rhombic shape.
This model represents the logo of KotlinConf, a conference dedicated to Kotlin programming language.
A slightly modified variant of my Square Interlace Tessellation.
A new box design based on Propellers Tessellation molecule. The molecule is depressed, meaning that the layers of paper forming the sides of the box are abov...
Happy New Year 2018! This is the first fold of my recent idea for making pixel tessellations, called Butterfly Pixel Tessellation. The molecule is basically ...
I designed this box as a container for corrugations (one of the pictures shows such use, for Monument Valley Corrugation). Some corrugations are springy and ...
This is my Monument Valley Corrugation, squeezed inside Predictable Box which I designed for this very purpose. The back side of the corrugation is less inte...
A Greek meander pattern folded as modular origami. The bent frame technique is the “Thoki Yenn style” which I also employed in a number of other models, for ...
A new design of mine, Dune Tessellation (long slit variant).
Another fold of Shark Teeth Corrugation, this time from rare blue Elephant Hide paper.
My design for a single-sheet Hamiltonian cycle of a cube. Origami folded from a single long (just above 5:1) rectangle of paper. The bent frame is in typical...
A new origami corrugation of mine. The model tends to curve slightly but in this case it actually makes it more interesting rather than being an issue. You c...
A side-by-side comparison of Shuzo Fujimoto’s Clover Folding (left) and my own Clover Folding Lookalike (right). Front and back sides are shown (top and bott...
This is my design which at first glance looks very similar to Shuzo Fujimoto’s Clover Folding but has a completely different crease pattern and design.
An improved version of my Celtic Cross. Based on standing crosses found throughout the British Isles.
I hadn’t folded Shuzo Fujimoto’s Clover Folding for at least two years when I decided to fold one again after seeing some examples beautifully folded by John...
Yet another variant of my Chevron Corrugation.
Believe it or not, this tessellation is closely related to my Double Spearhead Tessellation.
The same molecule as in Her Majesty’s Box, used for a tessellation. Diagonally rotated square grid, 32×32.
A box designed on my way back home from BOS50 convention (I had the idea for the molecule earlier, though). Folded from a sheet of gold-red Washi.
Metal Star, designed by Małgorzata Łodo. From a hexagon with 16×16×16 hex grid.
A slight modification of my Framed Two-in-One Flower, with a color-changed frame. The colour change is very simple: basically, in the first step the paper is...
A new box, aptly named Her Majesty’s Box, taking shape on the train back from the 50th Anniversary Convention of British Origami Society. Both the convention...
I will be teaching my Double Spearhead Tessellation in a workshop during BOS 50th anniversary convention in Stratford-upon-Avon a week from now.
This tessellation is just a slight modification of Double Spearhead Tessellation but it looks much more like Woven Rhombi Tessellation.
A fold of Framed Two-in-One Flower, folded from purple Tant paper.
A new fold of my UD-DU Chevron Corrugation.
Shuzo Fujimoto’s Hydrangea can be used as a modular unit. The method was first published by Meenakshi Mukerji and then reinvented independently by myself. I ...
This is a very cool model, designed by Roman Remme.
This corrugation is just a single row of molecules from Nest of Vipers Corrugation. This picture shows the opposite side of the corrugation than the former.
My new origami corrugation. Since it causes the sheet to curl, I’m thinking about using it for a lampshade or similar object. Different curling patterns can ...
Here is a slightly simplified version of my Shamrock Box. The original was based on a molecule which can easily be tessellated. However, with a single molecu...
Here is a fully simplified version of my Shamrock Box. The original was based on a molecule which can easily be tessellated. However, with a single molecule ...
This picture shows a comparison of two variants of Simplified Shamrock Box: Simplified Shamrock Box (on the left) Slightly Simplified Shamrock Box (on the ri...
This origami tessellation represents Union Jack, the flag of the UK. Since the pattern is quite intricate, even a single molecule can make an interesting mo...
This is a tessellation which represents a heart. The heart can be shaped to become a broken heart, which allows the model to be treated as action origami. Th...
A modification of my earlier Propellers Tessellation. The blazing propeller also resembles a whirlpool or a tropical cyclone. 14×14 grid per molecule, 48×48 ...
Kotlin is a programming language for the Java Virtual Machine (JVM) which is gaining in popularity. Having used it for some time, I’m quite happy about the r...
A box with a heart, which is also an action origami model. When things go wrong, the heart can be reshaped into a broken heart. The heart itself can be tesse...
A minor modification of my Propellers Tessellation: the blades are sharper and more slender than in the original.
A color-change version of my Box with Pajarita v. 1.1. In contrast to folds using harmony paper, here the different color of the Pajarita is the result of an...
My modification of Shuzo Fujimoto’s Hydrangea into a heart shape. I found on flickr a similar model, designed by Francis Ow.
An origami box with leaves, with the leaves’ stems in the center, based on an earlier coaster design. There is also a variant with leaves oriented tip-to-tip.
A modified version of Lelum Polelum Cube where one out of each pair of flaps is hidden.
A box with a ribbon bow, constructed using a molecule of my Sunflower Tessellation and with color change. This is a variant where the ribbon runs along the d...
A box with leaves based on this coaster. There is a color change between the walls and the leaves, though a variant using the same side of paper for both is ...
After folding the first coaster with leaves, I wanted to try rotating the leaves so that in the center they touch stem-to-stem rather than tip-to-tip. This i...
Flower Tessellation, designed by Meenakshi Mukerji. The molecule is derived from the Crossed Box Pleat (CBP). I folded and photographed this model for Meenak...
An origami coaster with a pattern of leaves. After designing, I found out others had done the same before, for example you can check out this picture [update...
An envelope for a wedding day card, featuring two hearts. The hearts are molecules of my Twisted Heart Tessellation. Basically, they are modified square twis...
A Cube from a unit I recently designed and later learned that was earlier designed independently by Saburo Kase. More details in the unit’s description.
This is version 1.1 of my Box with Pajarita. In this improved version, I took advantage of the fact that the box only has one molecule, and so I could get ri...
This is what one of the stages of collapsing my Big and Small Squares Tessellation looks like. I couldn’t help but think of a thermos bottle. The extra textu...
An origami envelope which looks almost like a classical glued envelope, but can be closed by folding only. If you use it for sending a letter by actual posta...
Box with a single molecule of my Shamrock Tessellation. Folded from 16×16 grid, of which the molecule consumes 12×12.
A color-change variant of Shuzo Fujimoto’s Hydrangea, designed by Meenakshi Mukerji. Test fold based on unpublished diagrams, kindly provided by Meenakshi [u...
My new iso-area origami corrugation which I called Shark Teeth due to the sharp triangular molecules of which it is composed. Like many other corrugations, t...
Box with a ribbon bow, constructed using a molecule of my Sunflower Tessellation and with color change added to make the ribbon stand out better from the bac...
Folding Stars and Squares Tessellation from a diagonal grid (rotated 45°) leads to an interesting effect. At the edges, small triangles form, creating a jagg...
Stacked molecules of my Hearts Tessellation. This model is a fractal, and you can go on stacking heart upon heart indefinitely, each twice as large as the pr...
A back-lit picture of Stars and Squares Tessellation, invented independently by me and Shuzo Fujimoto. You can find a similar backlit picture of this model i...
This Leafless Hydrangea model is a simple modification of Shuzo Fujimoto’s Hydrangea. It’s interesting how a simple change can modify a model’s appearance. J...
Origami is but pieces of colored paper, easily consumed by the elements and forgotten.
Box with a single molecule of my Pajarita Tessellation. Folded from Harmony paper which allowed the Pajarita to better stand out from the background.