Qulu Box
This box is the second design in the Zulu family. Instead of just triangles, the center of the molecule contains a square surrounded by trapezoids. The molec...
Origami Box Lids
Origami boxes in this category are folded in such way that the lid is folded from a single sheet of paper, and the bottom part from a separate sheets. The lids are often decorated. In particular, I often use a box lid to test a tessellation molecule: such a model takes much less time to fold than a complete tessellation with many molecules but already gives an impression of what the molecule is like. Folding only a single molecule also makes it easier to create a clean fold.
This page lists models of a single type. You might be interested in folding instructions instead.
Quartered Box
A very simple box whose lid is divided into four identical squares. It is basically the back side of a single molecule of Four-Sink Base Tessellation plus wa...
Box with Woven Triangles XXII
Derived from Box with Woven Triangles IX by changing the layer ordering.
Quicksands Box
The tessellation molecule that decorates this box spent several years in my drawer before I finally made a clean fold, since I designed it shortly after Dune...
Zulu Box
This box is decorated with a tessellation molecule that I called “Zulu” since the square with two diagonals resembles the maritime “Z” (Zulu) flag. Several p...
Box with Braided Pinwheel Tessellation (variant C) molecule
This is a simple box decorated with a molecule of Braided Pinwheel Tessellation variant C. It was one of my experiments with folding window blind fabric and ...
Box with Woven Triangles XXI
Another box with a tessellation molecule from the Woven Triangles family. The triangles are visible in deep layers of the model, surrounded by a flat frame.
Box with Woven Triangles XX
In this variant of Woven Triangles, the triangles are hidden in deeper layers of the molecule and surrounded by flat rectangular panels.
Pentagonal Box (CFW 219)
This box is a little gem I found in Fujimoto’s book Twist Origami III. I had never seen a picture of this model before, and I had to do a bit of reverse-engi...
Origami Deutschland Box
This box represents the logo of Origami Deutschland, the German Origami Society. I designed this model in the evening after the last day of the 2023 German c...
Box with Framed Pyramid
This design is derived from Box with Alien Pyramid by rearranging paper layers. While the latter molecule tends to rise up from the plane and become 3D, this...
Box with Alien Pyramid
The decoration on this box consists of just a few modified open-back square twists. It resembles a flat-topped pyramid such as found in Mesoamerican architec...
7-Box
The digit “7” on this box’s lid is a tessellation molecule, derived from the one on Z-Box. Hiding one of the horizontal bars sounded like a simple enough exe...
Ladybug Box
This box is decorated with a ladybug, which is a tessellation molecule. I used the same molecule for a BBU tile variant to make a decorated cube. While the f...
Box with Woven Triangles XIX
Design derived from Box with Woven Triangles XVIII by rearranging layers.
Box with Woven Triangles XVIII (white flax paper)
I folded this box in order to test John Gerard’s pure flax white paper. You can read more in my review of this paper.
Family Portrait of Boxes with Woven Triangles I-XVI
These pictures show sixteen boxes decorated with tessellation molecules belonging to the Woven Triangles family, folded in the years 2020-2021. All boxes wer...
Box with Woven Triangles XVIII
This model is derived from Box with Woven Triangles II by sinking one edge of the triangle which results in a striking pattern of triangular flat islands bet...
Box with Greek Cross and Squares IV
The tessellation molecule decorating this box is one of many similar patterns I designed after my visit to CfC conference in Zaragoza in February 2020. While...
Box with Woven Triangles XVII
This design is pretty much like Box with Woven Triangles XII but with different layer ordering. The change results in the triangles being covered by pleats a...
Hinged Shamrock Box
This box, designed in late 2020, is decorated with a shamrock, and folded from a single square of Tant paper. In contrast to most of my box designs, in which...
Chipped Box
Top edges of this box look as if they were chipped, hence the name. The whole top area is a tessellation molecule, derived by a simple change from the base t...
Box with Woven Triangles XV
This model from Woven Triangles series features a frame that surrounds the four interwoven triangles in the center of the molecule.
Z-Box (variant B)
In this variant of my Z-Box, the serifs on the letter Z are truncated and the letter has a more rounded look. At the time I designed the original and the B ...
Box with Woven Triangles XIV
This variant of Woven Triangles is very similar to number XIII except for the pleat visible on the box’s side having a different layer ordering.
Box with Woven Triangles XII
This version of Woven Triangles molecule looks very similar to Woven Triangles I at first glance but has a different arrangement of pleats. These seem to ci...
Box with Woven Triangles XI
In this Woven Triangles variant, pleats are not locked as strongly as in others, which will probably make folding a real multi-molecule tessellation neatly h...
Lucky Star Fractal Box (Simplified) Variant B
When you fold variants of my Lucky Star Box, you can extend the star to its fractal form. This particular variant emerges when you apply that procedure to th...
Z-Box
This box is decorated with a tessellation molecule representing the letter Z. Though it may not be obvious from its looks, this design is closely related to ...
Box with Woven Triangles X
In this member of the Woven Triangles family, the triangles have different proportions than the √5:√5:√10 sides found in most other variants.
Box with Shy Flower
This box features a tessellation molecule which I called Shy Flower. I derived it from my earlier Braided Pinwheel Tessellation. The flower is 3D and its mos...
Whirlwind Box (folded from full grid)
This Whirlwind Box is folded from a full 16×16 grid on copy paper. You can have a look at a fold from Tant paper and without the grid for a comparison of the...
Box with Woven Triangles IX
This is the first box in the Woven Triangles family to be based on a structure modified by twisting the square on the back side of the molecule. This also ma...
Lucky Star Box (Simplified) Variant B
This is variant B of my Lucky Star Box (Simplified). It is derived from the basic variant by pushing inside the box the empty areas around the star, which va...
Box with Woven Triangles VIII
As in Box with Woven Triangles VII, in Box with Woven Triangles VIII the triangles are located below other layers of paper and only partially peeking outside.
Box with Woven Triangles XIII
When folding this box, I thought I was making a clean fold of Box with Woven Triangles XVI, but I missed one detail and ended up with yet another design. You...
Box with Woven Triangles I
This is a simple box with a molecule of Woven Triangles Tessellation I. My first attempt at folding this model resulted in a slightly modified molecule and e...
Box with Woven Triangles VII
In this variant, the triangles are located in a deeper layer of paper, as if peeking through an opening in a wall.
Box with Woven Triangles VI
After a break, I’m back to presenting variants of molecules from the Woven Triangles tessellation series. Again, it’s a single tessellation molecule used to ...
Edelweiss Box (variant A)
I derived this design from my Shamrock 1.1 Box. Just like the former, it can be tessellated. It is named after a rare flower which grows in the mountains.
Whirlwind Box
This box is decorated with Whirlwind molecule which can also be used for a tessellation. Its design is closely related to my Woven Triangles family, but I ga...
Shamrock 1.1 Box (Refold)
A new fold of my Shamrock 1.1 Box — compared to the previous one, I managed to fold and shape the stem in a cleaner way. The shamrock can be tessellated.
Box with Woven Triangles V
Another member of the Woven Triangles family, single tessellation molecule on a box.
Box with Woven Triangles IV
This origami box is decorated with a tessellation molecule from the Woven Triangle family. In contrast to Woven Triangles I, II, and III, Woven Triangles IV ...
Box with Woven Triangles III
This is the third tessellation pattern in Woven Triangle family, and it looks good as a single molecule on a box as well.
Box with Woven Triangles II
Another box with a tessellation molecule from the Woven Triangle family.
Box with Woven Triangles XVI
Naming this box, the first in the Woven Triangles family, was a little misunderstanding. I originally labeled it number I since it was the first to be publis...
Box with Arrangement of Rectangles
Recently, I came up with a family of patterns which result from placing four modified twists around the corners of a rectangle or square. Some variations are...
Box with Color-Change Star (Hexagonal)
The technique used for this hexagonal box can be used for other polygons as well, resulting in boxes with a different number of sides. However, the minimum n...
Box with Decorated Maltese Cross
Box with a heavily stylized Maltese Cross. The molecule can be tessellated or used on a box as in this picture. This design uses my Flagstone Paneling techni...
Box with Maltese Cross II
Another approach to the subject of Maltese Cross. The molecule can be tessellated or used on a box as in this picture. This design uses my Flagstone Paneling...
Box with Maltese Cross I
An origami box featuring the heraldic Maltese Cross. The molecule is based on the one used in Maltese Cross Framed and a slight variation of the one used in ...
Souvenir of the Sea (Box)
Making a tessellation representing boats on the sea had been on my mind for quite some time when I finally came up with this design. It represents not just a...
Box with Cross Pattee IV
An origami box featuring the heraldic Cross Pattee. This model uses my Flagstone Paneling technique in order to achieve a completely clean space around the m...
Box with Cross Pattee III
An origami box featuring the heraldic Cross Pattee. This model uses my Flagstone Paneling technique in order to achieve a completely clean space around the m...
Box with Cross Pattee II
An origami box featuring the heraldic Cross Pattee. This model uses my Flagstone Paneling technique in order to achieve a completely clean space around the m...
Box with Cross Pattee I
An origami box featuring the heraldic Cross Pattee.I used the same molecule in Cross Pattee Tessellation, and just as the tessellation, the box also uses my ...
Simple Woven Rhombi Box
A simple origami box, based on my Woven Rhombi Tessellation. Folded from a sheet of unique paper with a subtle floral motif, whose name I do not know.
Shamrock 1.1 Box
Just in time for St. Patrick’s Day, here is a new version of my Shamrock Box (previous versions: 1.0 and two simplified variants). Current version was design...
Woven Square Box
A simple box lid derived from a modified Propellers Tessellation molecule.
Origami Free-Form Box: Poland
Today, on November 11th, Poland is celebrating 100 years of regaining independence. This origami box which represents an outline of Poland is an example of t...
Lucky Star Box (Simplified)
This is a model I will be teaching in just two weeks at a workshop during the 2018 CDO origami convention in Italy. The star can be used as a tessellation mo...
Lucky Star Box
Origami box with Lucky Star molecule. The molecule can be tessellated and is based on hexagonal 8×8×8 grid.
Sunk Star Boxes (two enantiomers)
Two folds of my Sunk Star Box with different twisting directions, side by side. Wherever there’s a twist in origami, we get two possible versions of the fold...
Sunk Star Box (Hexagonal)
The star in the center of this box is a kind of twist which does not lie flat and therefore can form a box but not a tessellation. This model is a part of a ...
Sunk Star Box (Square)
The star in the center of this box is a kind of twist which does not lie flat and therefore can form a box but not a tessellation. This model started a serie...
Wedge Flower Box (hexagonal)
A hexagonal variant of my Wedge Flower Box. Due to the different angles than in square grid, petals do not automatically align in a nice way, so they have to...
Box with Wedge Flower Variant
This box is decorated with a variant of my Wedge Flower molecule in which the central part is flat. Folded from Textured Paper from BOS Supplies.
Box with Leaves (tip-to-tip, 32 divisions)
A fold of my Box with Leaves (tip-to-tip) where the leaves were folded using a 32-division pleat instead of the usual 16 divisions. I taught this model at Ou...
Box with Leaves (tip-to-tip) cleaner fold
A new, cleaner fold of my Box with Leaves (tip-to-tip). I taught this model at Outdoor Origami Meeting in Kraków, Poland, this year.
Wedge Flower Box
Origami box decorated with a molecule of my Wedge Flower Tessellation. Folded from Via Felt 100 gsm paper stained with tea using a technique developed by my ...
Box with Star of David
A recent design of mine, a box with the Star of David, seen from the top. Folded from a single sheet of Tant paper without cuts or glue. The star can be tess...
Houstonia Box
This origami box represents a flower of the genus Houstonia, also known as bluets or Quaker Ladies. Some species, in particular Houstonia Caerulea have four ...
Depressed Propeller Box
A new box design based on Propellers Tessellation molecule. The molecule is depressed, meaning that the layers of paper forming the sides of the box are abov...
Her Majesty’s Box (gold Washi)
A box designed on my way back home from BOS50 convention (I had the idea for the molecule earlier, though). Folded from a sheet of gold-red Washi.
Her Majesty’s Box (WIP)
A new box, aptly named Her Majesty’s Box, taking shape on the train back from the 50th Anniversary Convention of British Origami Society. Both the convention...
Shamrock Box (Slightly Simplified)
Here is a slightly simplified version of my Shamrock Box. The original was based on a molecule which can easily be tessellated. However, with a single molecu...
Shamrock Box (Simplified)
Here is a fully simplified version of my Shamrock Box. The original was based on a molecule which can easily be tessellated. However, with a single molecule ...
Simplified Shamrock Box Variants
This picture shows a comparison of two variants of Simplified Shamrock Box: Simplified Shamrock Box (on the left) Slightly Simplified Shamrock Box (on the ri...
Broken Heart Box
A box with a heart, which is also an action origami model. When things go wrong, the heart can be reshaped into a broken heart. The heart itself can be tesse...
Box with Pajarita (color change)
A color-change version of my Box with Pajarita v. 1.1. In contrast to folds using harmony paper, here the different color of the Pajarita is the result of an...
Box with Leaves (stem-to-stem)
An origami box with leaves, with the leaves’ stems in the center, based on an earlier coaster design. There is also a variant with leaves oriented tip-to-tip.
Box with Ribbon Bow (diagonal)
A box with a ribbon bow, constructed using a molecule of my Sunflower Tessellation and with color change. This is a variant where the ribbon runs along the d...
Box with Leaves (tip-to-tip)
A box with leaves based on this coaster. There is a color change between the walls and the leaves, though a variant using the same side of paper for both is ...
Box with Pajarita 1.1
This is version 1.1 of my Box with Pajarita. In this improved version, I took advantage of the fact that the box only has one molecule, and so I could get ri...
Shamrock Box
Box with a single molecule of my Shamrock Tessellation. Folded from 16×16 grid, of which the molecule consumes 12×12.
Box with Ribbon Bow
Box with a ribbon bow, constructed using a molecule of my Sunflower Tessellation and with color change added to make the ribbon stand out better from the bac...
Box with Pajarita
Box with a single molecule of my Pajarita Tessellation. Folded from Harmony paper which allowed the Pajarita to better stand out from the background.
Square Interlace Box
This box is decorated with a pattern of Square Interlace Tessellation. I designed it as a container for a matching bracelet which is visible in some pictures...
Heptagonal Star Box (Chevron Corrugation)
This seven-sided star shape can be used as one half of a two-piece box or alone as an ornament. This heptagonal star design is based around my Chevron Corrug...
Box with Super-Ninja Star Tessellation — Comparison of Variants
These boxes are decorated with a molecule of Super-Ninja Star Tessellation which is an extension of Ninja Star Tessellation. The super-variant has larger bla...
Box with Super-Ninja Star Tessellation (Thin Lid Variant)
A box decorated with a molecule of Super-Ninja Star Tessellation which is an extension of Ninja Star Tessellation. The super-variant has larger blades.
Box with Super-Ninja Star Tessellation (Thick Lid Variant)
A box decorated with a molecule of Super-Ninja Star Tessellation which is an extension of Ninja Star Tessellation. The super-variant has larger blades.
Box with Twisted Bird Base Tessellation Molecule
Box with a single molecule of my Twisted Bird Base Tessellation.
Box with Walled Garden Tessellation Molecule
Another tessellation disguised as a box so that I can get away with folding just a single molecule, but I do plan to fold a full-fledged tessellation some ti...
Box with Two-in-One Flower Tessellation
Box with a single molecule of my Two-in-One Flower Tessellation. This pattern is derived from four molecules of Double Spearhead Tessellation slightly modifi...
Box with Shooting Star
I designed this box during the annual meeting of Polish Meteoritical Society (meteorites are one of my hobbies alongside origami).
Nuclear Flower Box
This origami box is decorated with a single molecule of Nuclear Flower Tessellation, a variant of Two-in-One Flower Tessellation. The name stems from the fac...